ALLAN PRICE Posted December 20, 2014 Report Share Posted December 20, 2014 looking for supplier for some rough bands,the ones I have on at the moment are measuring 153cm(exactly 60 inches)by 75mm wide & are 24 grit. it says on the rear,NORZON R817? any ideas chaps? cheers. Quote Link to comment Share on other sites More sharing options...
elfman Posted December 20, 2014 Report Share Posted December 20, 2014 1510 x75x24 should be the size your after try standerds Quote Link to comment Share on other sites More sharing options...
petercoulson Posted December 20, 2014 Report Share Posted December 20, 2014 I think you will find they are 1500x75 G24 for whitfield, over 1500 would be an odd size and special order. We have them although not Norton, all wholesalers would have them as well Quote Link to comment Share on other sites More sharing options...
elfman Posted December 20, 2014 Report Share Posted December 20, 2014 your right peter the nearest is 1500 but he did say exactly 60 inchs which is 1510 but that could be down to bad measuring or stretching of the band as for the ref r817 that on all the bands Quote Link to comment Share on other sites More sharing options...
petercoulson Posted December 20, 2014 Report Share Posted December 20, 2014 your right peter the nearest is 1500 but he did say exactly 60 inchs which is 1510 but that could be down to bad measuring or stretching of the band as for the ref r817 that on all the bands Err, he said 153cm first which is 1530? Maybe a broken tape measure. I would go with your guess of stretching. The 817 is the material reference. Quote Link to comment Share on other sites More sharing options...
ALLAN PRICE Posted December 21, 2014 Author Report Share Posted December 21, 2014 cheers guys,i did measure with a cloth measuring tape(the type used by tailors)around the outside of the band,it did come to 60 inches as that was the last measurement on the tape. Quote Link to comment Share on other sites More sharing options...
petercoulson Posted December 21, 2014 Report Share Posted December 21, 2014 Then it will be a 1500 belt as measurements are inside the belt Quote Link to comment Share on other sites More sharing options...
ALLAN PRICE Posted December 21, 2014 Author Report Share Posted December 21, 2014 I did think that but couldn't see 1500 anywhere on the inside? Quote Link to comment Share on other sites More sharing options...
petercoulson Posted December 21, 2014 Report Share Posted December 21, 2014 Whoops, didn't mean written but taken from the inside rather than the outside so a little stretching and sizing from outside makes the difference Quote Link to comment Share on other sites More sharing options...
ALLAN PRICE Posted December 22, 2014 Author Report Share Posted December 22, 2014 ah gotcha! Birch are charging around £7 each(on deal from nearly £10)are there any suppliers who would be a bit cheaper? Quote Link to comment Share on other sites More sharing options...
Lee Posted December 22, 2014 Report Share Posted December 22, 2014 I paid less from T.Colledge this month. Quote Link to comment Share on other sites More sharing options...
keithm Posted December 23, 2014 Report Share Posted December 23, 2014 We are cheaper than Birch for SIA 1500x75x24 grit, as long as you buy 10's Bands will never usually have the size on as they are cut from large rolls so the material can be used for many different sizes and joined where necassary. Quote Link to comment Share on other sites More sharing options...
robinh Posted December 23, 2014 Report Share Posted December 23, 2014 or you could try Healy's . ................................. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.